Denna fotboll engelska baseball tröja lektion presenterar, praktiserar och testa 10 Billiga nfl tröjor som är relaterade till kläder. Vårt brett utbud av olika fotbollsartiklar cykelbyxor inkluderar shorts, strumpor, t- shirts och till och med xn--billigatrningstights-jzb.com specialiserade underkläder.Fri frakt och gratis avkastning på Köp VR46 Collegetröjor online poster. Under de nio år sedan lanseringen blev en av de xn--piktrjor-d1a6k.com online-återförsäljare i att erbjuda trendledd mode för dem som har en budget.

Projects Details

Click here to enlarge the image above

Use the arrow or the scroll bar to see more images

Similar vehicles

Medium Truck Solution  

3 Pallet Removal Truck  

5 Pallet Removal Truck  

4 Pallet Removal Truck

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects

This 4 container Removal Truck started life as a Marsden Vanplan demount body.

A Daf cf65 220 with rear air was chosen for this project. The body was mounted on to the chassis. The near side of the body was cut out and used to make four container doors.

All the required door frames and additional support was fitted.  Two new full side skirts were made out of light weight steel. New fibre glass side skirts were made using our own design and moulds.

As this vehicle was going to be a four container plus space Removal Truck it was decided to fit a tuck away tail lift.

The vehicle was painted in a plain white, and had one of our brand new alloy ramp system's. This was a two part ramp that is stored on the inside of the rear doors, and a side table that is stored in the side locker.


Return to Projects